BMW KEYMAKER Programme is for keyprogramming (PCF transponders 7930,7931,7935 This programme is very

simple in using it and does not require additional equipment to

work with EWS 2,3,3+.Programme and adaptor BMW KEYMAKER  

are not used for  68HC11EA9 processor which has LOCK BIT

on it.If a processor has LOCK BIT on it the programme will warn

about it.Operating EWS

Examine EWS carefully to find processor 68HC11EA9(mask 2D47J,1D47J,0D46J).Cut PIN 20 from the processor on

EWS motherboard as it is shown in the picture.

Choose quartz type 614000(EWS 2) in the programme or

8000000(EWS 3,3+). Then connect the processor 68HC11EA9

using the connector following this picture.(WARNING!!!Adaptor

BMW KEYMAKER should be cut from power supply during this!!!)